Software
Download
i-CATVision™ Stand Alone Workstation/Laptop Minimum Requirements:
1. Operating System: i-CATVision™ stand alone is fully tested and released for
use with Windows XP and Windows Vista. We are working towards Windows 7
support in the near future.
* If Apple PC or laptop: i-CATVision™ will not operate on Apple OS.
A Windows Operating system emulator/partition must be utilized.
2. At least 2 GB RAM (4 preferred).
3. Video Display Resolution of at least 1024 x 768 with 32 bit color.
(1600 x 1200 preferred).
4. 40 GB hard drive or larger. |
VisionQ version 1.8.1.10 update 1
This update is for acquisition computers running version 1.8.1.10 only and contains an update for PACS interface.
To access the below file for download, you must enter a password. Please contact our Technical Support department for the password at 800-205-3570 or 215-997-5666, ext. 5.
Once the download has completed, locate and select the file using Windows Explorer, and then run the File->Extract All menu command. Enter the desired destination folder and click Next. You will then be prompted for the password provided by technical support. Three files will then be extracted to the specified drive location: the update file, the update instructions document and a technical bulletin document. At that time, please read the installation instructions (file name SP00105 - Install VisionQ 1.8.1 Update.pdf) before proceeding with the update.
Click the below file to download:
VisionQ181u1b.zip
i-CATVision Stand Alone version 1.8.1.10
This is an update to i-CATVision Stand Alone ONLY. This upgrade
includes Windows Language support for Japanese, Korean, Dutch,
Polish and Czech. It also includes the enhancements below:
Click on the file below for download.
Vision 1.8.1.10 .zip (4.98MB)
Please contact Technical Support to upgrade the i-CATVisionQ
Acquisition computer
at 215-997-5666, ext. 5.
i-CATVision Stand Alone version 1.8.0.5 featuring Tru-Pan™
*IMPORTANT – Version 1.8.0.5
is compatible with Classic i-CAT, Next Generation i-CAT and
KaVo 3D eXam units only. Customers currently using GXCB-500
and 3D eXami please refer to i-CATVision v1.7.2.4
This is an upgrade to i-CATVision Stand Alone Only. Click
on the below file for download.
Vision 1.8.0.5.zip (5.09 MB)
Please contact Technical Support to upgrade the i-CATVisionQ
Acquisition computer at
215-997-5666, x5.
If you do not currently have a Tru-Pan license and would
like more information on the
Tru-Pan feature, please contact Imaging Sciences Sales at
800-205-3570 x3 or visit
www.Tru-Pan3D.com
3DVR:
The below is 3DVR v5.0.0.3. This version of 3DVR is designed
to be launched from the
i-CATVision Software and will automatically load the current
case.
First uninstall your existing version of 3DVR. Then Click
the file link below to download. Save and uncompress to your
desktop. Then launch the 3DVR program via the icon. This will
register its location on the computer. Once the 3DVR has been
launched one time, it can now be accessed via the iCATVision
software. To access via i-CATVision, open i-CATVision and
load a case, then click Tools/Start 3DVR. 3DVR will open and
the case will automatically load
3DVR v5.0.0.3 (2.56 MB)
iCATTransfer v1.9
Click the file below to download. Save to your computer than
uncompress and overwrite the previous version.
iCATransferv1.9.zip
|
